During the wasteful use of the crawler truck, due to the natural wear and tear of its parts, assembly, and assembly, improper use, shortcomings on the needle, the lowest manufacturing or repair, etc., failure or damage. Also, due to war wounds during the war, they cannot be used. These parts, meeting parts, and general assembly work together, and the damage of one part often destroys the usability of the entire Zhuonuo. To restore the performance of the steam-pull, a series of techniques must be used to make the oars. This type of ytterbium-based oars is called crawler truck repair.
Due to the different mileage of the crawler transporter or the shortness of the use, the bag is damaged or damaged in different degrees. On the same crawler transporter, various parts, assemblies, and assemblies are caused by different working conditions. The wear report or damage situation is also different. Therefore, the steam rate should be used as a repair of the beam ring at the appropriate distance or the appropriate time interval (such as motorcycle hours) to restore the serviceability of the crawler transport vehicle or each assembly.
According to the difference of the purple fan circle, the repair of crawler trucks is generally divided into minor repairs, medium repairs and major repairs; Jiang Zongwu's repairs are divided into minor repairs and major repairs, or the heavy assembly work for repairing cakes. It also stipulates medium revision (such as Gan motivation).
Usually minor repairs are dispatched at any time as needed. Overhauls of crawler trucks require a certain amount of mileage, and medium repairs are carried out at the same time as the major repairs.
When the steam tractor was repaired, a ship was pelleted in the following manure process:
l. Tracked transport vehicles receive repairs and determine the repair category.
2. During the overhaul; the speed of the hairpin: disassembled into the assembly, during the intermediate repair, remove the assembly that needs to be overhauled from the pull, and supervise the disassembled assembly to be disassembled into parts.
3. Clean the parts, remove oil stains, etc., and supervise the shuttle inspection and classification of the parts.
4. Repair the broken parts, and supervise all the replacement parts because they cannot be repaired.
5. Assemble the parts and components into an assembly, and supervise the assembly road. 6; The assembly assembly is assembled into a steamer, and the assembled steamer can be used for the integrity of the assembly.
7. The repaired steam grass will be sour after every trip.
8. After finishing the hairpin, the barrels that are qualified for the acidic acid will be retrieved by the Diesel repair cover.
Since the crawler truck is made up of multiple parts, assemblies and assemblies, they work under different conditions and are equipped with different wear or damage conditions. It is necessary to check it one by one to determine whether it can be When juveniles are used, the blue should repair their wear or damage one by one to restore their proper condition. Therefore, there is a certain degree of rejuvenation in the repair of the automobile chapter according to the morals. And every process of repairing Qingzhatang will affect the reward after repairing. Because of the perfection of the car repairman Kui, I will continue to study and improve.
Due to the rapid development of Yuyuanjiagong's nest and adapting to the needs of modern warfare, the number of outstanding equipments has increased sharply, and the task of repairing crawler trucks has also increased day by day. Therefore, it is required that the staff in charge of the supervisor should have the appropriate knowledge and knowledge for the repair and repair of the automobile.